RM10

 

Link to Wastewater Treatment Equipment
Back to Wastewater Treatment Supplies
 

   Provides an economical and 
   environmentally sound solution to your
   wastewater problems.

RM-10 is a proprietary blend of clay minerals, polymers and pH adjusting agents, which allow ONE-STEP entrapment of emulsified oils and dissolved metals from various waste streams. RM-10 products are qualified to remove the following contaminants from waste streams: heavy metals, oils and grease, suspended solids
RM-10 is a proprietary blend of clay minerals, polymers and pH adjusting agents, which allow ONE-STEP entrapment of emulsified oils and dissolved metals from various waste streams.  RM-10 products are qualified to remove the following contaminants from waste streams:
  •        heavy metals
  •        oils and grease
  •        suspended solids

There are currently over 20 unique RM-10 products available in a variety of formulas to treat a vast array of industrial wastewaters.  Types of waters include, but are not limited to, the following:

  •         parts washing
  •         vibratory deburring
  •         mop and scrubber water
  •         paint and ink wash waters
  •         die casting
  •         dye penetrants
  •         adhesive wash waters

Have a question about your wastewater?  E-mail us or call 800-694-7867
 

Sample Analysis from General Industrial Application
Parameter (mg/l) Untreated After Treatment and Filtration
  Appearance   Cloudy, gray   Clear, colorless
  Suspended Solids   > 3,840   <  3
  Oil & Grease   45   <  3
  Cadmium   0.02   < 0.005
  Chromium   22.6   < 0.005
  Copper   0.99   0.02
  Lead   0.13   < 0.02
  Nickel   11.9   0.02
  Zinc   1.23   0.01

CDF Industries specializes in increasing the effectiveness and productivity with environmental friendly wastewater equipment and clays while saving organizations money.   We have a variety of equipment that can treat waste streams from 100 gpd to 100,000 gpd.  Our clay flocculant is a one step process and our water can be treated for discharge or treated for reuse.  Our treatment cost for our systems are generally between 2- 4 cents per gallon.